P80 ejection issue

R

Racer7696

Active member
Exchange Privileges
Joined
Feb 26, 2022
Messages
104
Reaction score
32
Points
28
So I have a p80 with Rt rear rails and a johnny glock trigger. Having an issue its not extracting to the right like it should. They either hit my head or barley miss the right shoulder. So there extracting at 5 o'clock instead of three o clock. The johnny glock trigger comes with an oem 336 extractor for info. Any ideas
 
Switch to a Gen 4 ejector (which is different than an extractor). It's the ejector that is responsible for directing the empty case when it's extracted.
 
Racer7696 said:
So I have a p80 with Rt rear rails and a johnny glock trigger. Having an issue its not extracting to the right like it should. They either hit my head or barley miss the right shoulder. So there extracting at 5 o'clock instead of three o clock. The johnny glock trigger comes with an oem 336 extractor for info. Any ideas
Click to expand...
Had the same trouble with the MIM factory Glock extractor. Ejection was erratic. Replaced it with a billet extractor and now it piles up the cases 5 feet to the right at 3 o'clock.
 
Maybe it's mismarked, 336 is for 9mm so it's technically right. A 40 cal extractor throws the case back at you and sometimes forward. How do I know just ask me.
 
I'll try a gen 4 extractor
 
Where is best place to get oem parts and to look up part numbers want to make shure along with ejector I have the right spring and cup I have for a non lci extractor
 
Last edited:
I had the same problem. Gen 4 ejector and billet extractor instead of the OEM MIM extractor. Ejects pretty well now
 

Share this page

Back
Top