New! P80 PFC9 auction on GB, with fancy slide and RDS

Bobster

Bobster

Mega-Patriot!
Exchange Privileges
Made 50,000th post!
Joined
Nov 14, 2022
Messages
5,163
Reaction score
5,111
Points
168
Location
Central Florida
P80 PFC9 auction on GB, with fancy slide and RDS. LINK The PFC9 is the serialized version Polymer 80 put out before they went out. A MUST for the true collector! :D

I've bought a few guns from this vendor. Good people, small hole-in-the-wall pawn shop on a major road maybe 1/2 hour from me. They are minutes from the expressway and there is a "Pull-n-Pay" (LKQ) near them so I will combine trips. I might leave a "giggle bid" of $111.11 on it but I suspect it will top $300. :) What do you think?

pfc9.JPG
 
Last edited:
$200.

Good luck bro. I need another Polymer 80 like I need a brain tumor. I'll bet the guy who built it had about $500 tied up in that gun.
 
Bongo Lewi said:
$200.

Good luck bro. I need another Polymer 80 like I need a brain tumor. I'll bet the guy who built it had about $500 tied up in that gun.
Click to expand...

To me... the purpose of (buying) a P80 is to build it or customize it for yourself. I wouldn't ever buy someone else's P80. Plus I would not trust it.
 
Last edited:
Racer88 said:
To me... the purpose of (buying) a P80 is to build it or customize it for yourself. I wouldn't ever buy someone else's P80. Plus I would not trust it.
Click to expand...
Depending on the price though, a serialized frame could be had if you were inclined to have a serialized frame. Strip it down and make it your own.
 
brian said:
Depending on the price though, a serialized frame could be had if you were inclined to have a serialized frame. Strip it down and make it your own.
Click to expand...
OK... I'd give'im $30 for that. Maybe.
 
Racer88 said:
To me... the purpose of (buying) a P80 is to build it or customize it for yourself. I wouldn't ever buy someone else's P80. Plus I would not trust it.
Click to expand...
That makes two of us.

Buying a handgun somebody else made on their kitchen table is like buying a car somebody else made.

Screenshot 2025-07-24 at 6.46.56 AM.png
 
Last edited:
Probably worth around $200 to $250 with the optic, assuming it works and is in good shape, but don't think it will sell on the high end of that estimate. Regardless of the color, that slide, in my opinion, is ugly. Never liked that type of slide cut.
 
The results for those of you interested... $270 was the sales price.

covalco072925.JPG
 
Or, like buying reloaded ammunition at an estate sale.
I won't even buy "remanufactured" from a licensed company.

I will only take it for free from two brothers in law, and one of them 1) provided detailed information on the components (bullet weight, primer, and powder grains and type) AND 2) taught me to reload.

Even used commercial guns are iffy for me.
 
FrankenGlock said:
Went above the high end of my estimate. Someone got carried away and bid too much.
Click to expand...
Probably some wanna be gangsta. I already have a seralized PFC9 to carry and plenty of 80% ones to use otherwise. I may have gone $100. Even that may have been a bit much for my use of it. I have a bunch of red dots I have managed to acquire for nominal fees, so that aspect didn't even attract me. Hopefully the buyer can ensure it is safe.
 
Back
Top