Strike 80 Frames

I can't guess anything other than legal issue.

Since they won't make us what we want. You have to make your own. 3D print.

P80RALPH latest print 43X frame. Multicolor printing is awesome.
IMG_3771.jpg
 
Cmorency13 said:
Any word if Strike80 frames will be reproduced?
Click to expand...
Strike Industries quit selling the Strike80 long before the current mess created by the new ATF rules and with the back and forth in the courts and all the uncertainty of 80%. I seriously doubt that they are anxious to get back into the 80% market.
 

Bambu Lab A1 3D Printer $400 to $550 combo.​

Best printer in the game right now.
its the new 3D printer that is used to make multicolor prints, many 3D builders like it a lot and
and its working out of the box perfectly.
Product Features
1703863880127.png
1703864167225.png

  • Full-auto Calibration
  • Multi-Color Printing
  • Active Flow Rate Compensation
  • 1-Clip Quick Swap Nozzle
  • Active Motor Noise Cancelling
  • 256*256*256 mm³ Build Volume
 
Last edited:
its called Marauder frame, they do crazy designs out there.
1703867341020.png
 
Last edited:
At the moment, forward mag holders are legal, or at least the AFT hasn't "opinioned" them to be illegal yet. They are on the same ground that pistol braces were before recent events. Eventually, they are sure to deemed by the Crown to be too dangerous for mere peasants, but they are quietly legal for now. If you were to print your own, keeping the angle well off of 90 degrees would help avoid it being incorrectly labeled as a VFG.
 
Mooner, did you have any problems with that 43X frame and feed and extraction? Asking for myself.
 
I saw something where Strike Industries is going to release the Strike 80 frame as a complete (finished) frame and as a complete pistol.

The SCT frames are the same as the old Strike 80 frames. My guess is who ever is making the SCT frames will be making them for Strike Ind. too.

The nice thing about the Strike 80/SCT frames is how easy they are to open up for Gen 4/5 slides.
 
bapegg said:
I saw something where Strike Industries is going to release the Strike 80 frame as a complete (finished) frame and as a complete pistol.

The SCT frames are the same as the old Strike 80 frames. My guess is who ever is making the SCT frames will be making them for Strike Ind. too.

The nice thing about the Strike 80/SCT frames is how easy they are to open up for Gen 4/5 slides.
Click to expand...
Get it here:

www.primaryarms.com

Strike Arms Pistol Compact Frame - Fits GLOCK 19 Gen 3

Warning and Disclaimer: Due to the varying tolerances used by different parts manufacturers, ensuring the safe and proper function of this product is mandatory before use.
www.primaryarms.com
 
Alex said:
Get it here:

www.primaryarms.com

Strike Arms Pistol Compact Frame - Fits GLOCK 19 Gen 3

Warning and Disclaimer: Due to the varying tolerances used by different parts manufacturers, ensuring the safe and proper function of this product is mandatory before use.
www.primaryarms.com
Click to expand...
Yes that is for the 100% finished and serialized frames.

The new 100% Strike frame does look like it will work for the G44 slide once you open the frame up enough to accept a Gen 5 slide. The rails are separate from the locking block.
 

Share this page

Back
Top