Well, it's 1/2 of a Dagger... I Can't Believe How Cheap (Inexpensive) it is.

OutaFocus

New member
Joined
Aug 4, 2022
Messages
12
Reaction score
18
Points
3
Location
Epworth (Blue Ridge), Georgia
I wasn't sure where to post this, so I'll try it here.

I thought I'd try one of the SCT frames and for $49.95, what could go wrong? Actually AIM Surplus had it on sale for $44.95, so I pulled the trigger...hehe.
I built it using a Dagger complete upper w/ RMR cut and Threaded Barrel that I got on sale for $199.00 or so and dropped in an Overwatch Precision Trigger Shoe ( the basic Polymer one) and a basic lower parts kit. When all was said and done I totaled it up and realized I had less than $300.00 in it. I'm amazed at what can be done for so little these days.

IMG_0555.JPG
 
Do they make any slides like that without the side cuts on the top edge?
 
First thing I check these days... result of many hrs on Reddit 😆😁😄
One could wonder how many problems are created on a simple mistake, but directly attributed to only because it's an 80% build.

It's really a simple oversight/ you'd think they'd make the pin and it's channel tapered to prevent incorrect insertion. It wouldn't take a steep taper, just enough to prevent the plunger from fully seating.

/K
 
I wasn't sure where to post this, so I'll try it here.

I thought I'd try one of the SCT frames and for $49.95, what could go wrong? Actually AIM Surplus had it on sale for $44.95, so I pulled the trigger...hehe.
I built it using a Dagger complete upper w/ RMR cut and Threaded Barrel that I got on sale for $199.00 or so and dropped in an Overwatch Precision Trigger Shoe ( the basic Polymer one) and a basic lower parts kit. When all was said and done I totaled it up and realized I had less than $300.00 in it. I'm amazed at what can be done for so little these days.

View attachment 7162
So you got the Overwatch Precision Trigger & lpk for $50. Dang, where?
 
i got one of the dagger slides with the docter cut because I had a vortex viper sitting on a shelf not doing anything (and a frame). 199 you can't really go wrong, and PSA always backs their stuff. sub 300 build, not including optic.
 
I just installed a Dagger slide on my oem glock frame. Nothing special just a basic slide. Fit perfect and works perfect.$125. Shot low so replaced the front sight with a lower one I had.
 
Are the new frames coming with the rear portion with like a web or box looking area to be removed.
 
Beautiful build OuttaFocus. Is that a finish-it-yourself kit? Or run through an FFL? I hadn't heard of that company before now (Brand new to this forum... I'll be learning alot I see...)
 
Beautiful build OuttaFocus. Is that a finish-it-yourself kit? Or run through an FFL? I hadn't heard of that company before now (Brand new to this forum... I'll be learning alot I see...)
The SCT frame is a "100%" serialized frame and has to go through an FFL.

Thanks for joining the forum and participating by posting! When you get a chance, please write up a quick “introduction” (or RE-introduction if you were a former MGB forum member) of yourself over in the Introduce Yourself! section. Tell us about yourself, your building experience, and how you found the forum.

Jump into other threads, too! Come on in... the water's fine! 😊
 
The SCT frame is a "100%" serialized frame and has to go through an FFL.

Thanks for joining the forum and participating by posting! When you get a chance, please write up a quick “introduction” (or RE-introduction if you were a former MGB forum member) of yourself over in the Introduce Yourself! section. Tell us about yourself, your building experience, and how you found the forum.

Jump into other threads, too! Come on in... the water's fine! 😊
Interesting.

Thanks for the warm welcome. Just posted there :)

Thanks for the kindness. This is not common on other forums.
 
I also jumped on a recent $199 Dagger slide sale. PSA can be slow as molasses on shipping but the Dagger is a great pistol for the price. The components too.
 
Back
Top