Latest activity
-
DDeleted member 709 replied to the thread Rook Tactical Update!!.I can relate! This is the build i just finished!
-
-
DMy builds have a lot of Rook parts. Glad to hear their back. I need to stock up on some parts.
-
DThough I’m not a customer of theirs. It’s important to keep the vendors going especially if they make a quality product with good...
-
DGlad to hear that they're still in business. In my experience, by far the best quality parts.
-
DUPDATE FROM ROOK TACTICAL! BLACK FRIDAY/THANKSGIVING SALE UPCOMING!! (admin edited to embed image in message, instead of just a thumbnail)
-
-
DDeleted member 709 replied to the thread Polymer80 G19 build UPDATE.For those interested, here is the COMPLETE build list for this pistol:
-
-
DUnknown member reacted to Racer88's post in the thread Tempted by the Frame of Another - Geisler Transparent Frame! with
Like.
https://uspatriotarmory.com/product/geisler-defence-new-limited-edition-80-19x-gen-2-transparent-frame-jig What's the "gouge" on... -
DDeleted member 709 replied to the thread New Compact Build In Progress.😆
-
DUnknown member reacted to FrankenGlock's post in the thread New Compact Build In Progress with Like.
I’m noticing a pattern.
-
DDeleted member 709 replied to the thread Polymer80 G19 build UPDATE.UPDATE NUMBER TWO: Overtime is not approved at work and I already had 81 hours this week so they kicked me loose an hour early today. I...
-
-
DDeleted member 709 replied to the thread Polymer80 G19 build UPDATE.After i got home from the range & while i was walking the dog, i looked up ‘zev mag release problems’ online. The first result was what...
-
-
DI'm too lazy to do it but but somewhere there is a list of known PMF's failures by parts peddler. An example of the Zev magazine...
-
DDeleted member 709 replied to the thread New Compact Build In Progress.Looking forward to your build updates! I took a family photo today, still working on the compact.
-
-
DUnknown member reacted to GuitarmanNick's post in the thread New Compact Build In Progress with Like.
When my other builds were done, things were less complicated than today. I still have a couple of PF940C frames that were finished...
-
DDeleted member 709 replied to the thread Polymer80 G19 build UPDATE.Ok, i’ve removed the faulty Zev mag release & replaced it with the known working Hyve mag release. I took the magazine well off and...
-
-
DUnknown member reacted to Patriotp80builder's post in the thread Help! Patriot80Builder's troubleshooting thread. with Like.
Found an article on my exact issue by FreedomUnlimited: P80 Locking Block/Barrel Issues
-
DDeleted member 709 replied to the thread Short is sexy..
-
DDeleted member 709 replied to the thread Short is sexy..Some additional pictures of his SBS. I envy this shotgun so much.
-
DUnknown member reacted to CountryFolk's post in the thread REMINGTON 721 in .375 H&H MAGNUM with Like.
-
DUnknown member reacted to CountryFolk's post in the thread REMINGTON 721 in .375 H&H MAGNUM with Like.
-
DUnknown member reacted to CountryFolk's post in the thread REMINGTON 721 in .375 H&H MAGNUM with Like.
It's almost been 6 months since I had put this Remington721 .375 H&H Mag on layaway and now I finally got it paid off! The seller wasted...
-
D
-
DUnknown member reacted to FrankenGlock's post in the thread Smooth operator safety plunger with Like.
The Smooth Operator mod is one of a few steps to make a Glock/clone trigger function more smoothly. This mod also helps the Vertical...
-
DFamily portrait.
-
DHave some SCT 19 frames sitting around and have too many 19’s so I decided to convert one to a 26x. Since the G26 has a Gen 4 sized...
-
DUnknown member reacted to TomR2's post in the thread Any uncommanded discharges with 80% builds with Like.
Have you watched any of the videos on YouTube that show some of the safety checks suggested by several folks who appear to have some...
-
DUnknown member reacted to Racer88's post in the thread PF940SC with Lone Wolf slide won't rack with Like.
Nice looking build! Thanks for joining the forum and participating by posting! When you get a chance, please write up a quick...
-
DUnknown member reacted to Patriotp80builder's post in the thread Help! Patriot80Builder's troubleshooting thread. with Like.
Yeah, I chose to remove from the locking block as its cheaper to replace than glock parts :)
-
DDeleted member 709 replied to the thread Polymer80 G19 build UPDATE.I put the hyve up to the notch in the mag just the two. The hyve literally locks into the groove/notch. The Zev barely makes contact &...
-
DDeleted member 709 replied to the thread Polymer80 G19 build UPDATE.On the left: inside surface of the Zev release where it fits with the mag. On the right: inside surface of the Hyve where it fits with...
-
